<?php 
set_time_limit(-1);
use Barryvdh\DomPDF\Facade\Pdf;
use PhpOffice\PhpSpreadsheet\IOFactory;
use PhpOffice\PhpSpreadsheet\Worksheet\Worksheet;


$temperatures = j(setting("temperatures"));


if(getisset("all")) {
    $drawings = apply_welded_filter(
        db("weld_logs")->select("line_number")
    )
        ->groupBy("line_number")
        ->get()
        ->pluck("line_number")
        ->toArray();
} else {
    $drawings = explode(",", get("line_number"));
}
$count = 0;
foreach($drawings AS $draw)  { 
    $documentInfo = document_template("Welding_Jurnal");
    $j = j($documentInfo->json);


    // Load your Excel template file
    $spreadsheet = IOFactory::load('storage/documents/' . $documentInfo->files);

    // Get the active sheet or a specific sheet where you want to make replacements
    $sheet = $spreadsheet->getActiveSheet(); // or $spreadsheet->getSheetByName('SheetName');

    
$fileName = $draw;

$weldLogs = apply_welded_filter(
    db("weld_logs")->where("line_number", $draw)
)
    ->whereNotNull("welding_date")
    ->orderBy("welding_date", "ASC")
    ->get();

 $line_list_fluid_ru  = "";
 $allRowData = "";
 $basinc = "";
 $sicaklik = "";

 if($weldLogs->count() != 0) {
    $drawing_no = $weldLogs[0]->line_number;
    $cover_zone = __($weldLogs[0]->project);
    $first_welding_date = df(
        apply_welded_filter(
            db("weld_logs")->where("line_number", $draw)
        )
            ->whereNotNull("welding_date")
            ->orderBy("welding_date", "ASC")
            ->first()->welding_date
    );

   
    $last_welding_date = df(apply_welded_filter(
        db("weld_logs")->where("line_number", $draw)
    )
        ->selectRaw('MAX(GREATEST(
            COALESCE(welding_date, "1000-01-01"),
            COALESCE(vt_test_date, "1000-01-01"),
            COALESCE(pt_test_date, "1000-01-01"),
            COALESCE(mt_test_date, "1000-01-01"),
            COALESCE(ut_test_date, "1000-01-01"),
            COALESCE(rt_test_date, "1000-01-01"),
            COALESCE(pmi_test_date, "1000-01-01"),
            COALESCE(ht_test_date, "1000-01-01"),
            COALESCE(ferrite_test_date, "1000-01-01")
        )) AS latest_date')
        ->first()->latest_date);

        
    $lineList = db("line_lists")
    ->where("line_no", $weldLogs[0]->line_number)
    ->where("fluid_code", $weldLogs[0]->fluid_code)
    ->first();

    if($lineList) {
        $line_list_fluid_ru = $lineList->fluid_ru;
    } else {
        Log::error("{$weldLogs[0]->line_number} {$weldLogs[0]->fluid_code} datası bulunamadı Generate ZHCP Welding Journal ERROR! ");
    }
    
 
$rowNumber = 1;
 $work_permit_documents = db("work_permit_documents")->where("duty", "NDT")->where("level", 3)->first();
 $work_permit_documents2 = db("work_permit_documents")->where("duty", "инженер по сварке")->where("level", 3)->first();

 $templateRowNumber = 25; 
 $startRow = $templateRowNumber; 

 //$sheet->getRowDimension($templateRowNumber)->setRowHeight(100);


 $highestRow = $sheet->getHighestRow(); // En yüksek satır numarasını al

$templateRowCells = [];
$mergedCells = [];

// Iterate through the template row and save cell values and merge information
foreach ($sheet->getRowIterator($startRow)->current()->getCellIterator() as $cell) {
$templateRowCells[] = $cell->getValue();
}


 foreach($weldLogs AS $weldLog) {
    if ($startRow > $highestRow) {
       // $startRow = $highestRow; // Veya bir önceki satır: $highestRow - 1
    }
     $basinc = $weldLog->operating_pressure_mpa;
     $sicaklik = $weldLog->operating_temperature_s;
  
 
     $weldLog->welding_date = rejected_date($weldLog->welding_date) ? "-" : df($weldLog->welding_date);
     $weldLog->vt_test_date = rejected_date($weldLog->vt_test_date) ? "-" : df($weldLog->vt_test_date);
     $weldLog->pt_test_date = rejected_date($weldLog->pt_test_date) ? "-" : df($weldLog->pt_test_date);
     $weldLog->mt_test_date = rejected_date($weldLog->mt_test_date) ? "-" : df($weldLog->mt_test_date);
     $weldLog->ut_test_date = rejected_date($weldLog->ut_test_date) ? "-" : df($weldLog->ut_test_date);
     $weldLog->rt_test_date = rejected_date($weldLog->rt_test_date) ? "-" : df($weldLog->rt_test_date);
     $weldLog->pmi_test_date = rejected_date($weldLog->pmi_test_date) ? "-" : df($weldLog->pmi_test_date);
     $weldLog->ht_test_date = rejected_date($weldLog->ht_test_date) ? "-" : df($weldLog->ht_test_date);
     $weldLog->ferrite_test_date = rejected_date($weldLog->ferrite_test_date) ? "-" : df($weldLog->ferrite_test_date);

     $weldLog->pwht_date = rejected_date($weldLog->pwht_date) ? "-" : df($weldLog->pwht_date);
 
     $naksWelder = db("naks_welders")->where("welder_id", $weldLog->welder_1)->first();

     if($weldLog->welder_2 != "") {
         $naksWelder2 = db("naks_welders")->where("welder_id", $weldLog->welder_2)->first();
     }

     
     $col24 = "";
     if($work_permit_documents) {
      $col24 = "{$work_permit_documents->name_surname}, {$work_permit_documents->certificate_number}";
     }

     $col25 = "";
     if($work_permit_documents2) {
      $col25 = "{$work_permit_documents2->name_surname}, {$work_permit_documents2->certificate_number}";
     }
     $wps = db("w_p_s")->where("details", $weldLog->wps_no)->first();
     $mtos = db("incoming_controls")->where("certificate_no", $weldLog->certificate_number_of_1)->first();
     $mtos2 = db("incoming_controls")->where("certificate_no", $weldLog->certificate_number_of_2)->first();
     $naks_consumables = db("naks_consumables")->where("inspection_test_report", $weldLog->welding_materials_2_certificate_no)->first();

     $naks_consumables2 = db("naks_consumables")->where("inspection_test_report", $weldLog->welding_materials_1_certificate_no)->first();
     $naks_consumables3 = db("naks_consumables")->where("inspection_test_report", $weldLog->welding_materials_3_certificate_no)->first();

    $naksConsumablesData = "";
    $naksConsumablesData2 = "";
    $naksConsumablesData3 = "";

    if($naks_consumables) {
        $certification_date = df($naks_consumables->certification_date);

        $reportNumber = $naks_consumables->inspection_test_report;


        $naksConsumablesData = "⌀{$naks_consumables->diameter} {$naks_consumables->inspection_certificate_standart}, серт. $reportNumber от $certification_date";
    }

    if($naks_consumables2) {
        $certification_date = df($naks_consumables2->certification_date);

        $reportNumber = $naks_consumables2->inspection_test_report;

        $naksConsumablesData2 = "⌀{$naks_consumables2->diameter} {$naks_consumables2->inspection_certificate_standart}, серт. $reportNumber от $certification_date";
    }

    if($naks_consumables3) {
        $certification_date = df($naks_consumables3->certification_date);

        $reportNumber = $naks_consumables3->inspection_test_report;

        $naksConsumablesData3 = " ⌀{$naks_consumables3->diameter} {$naks_consumables3->inspection_certificate_standart}, серт. $reportNumber от $certification_date";
    }

    $welders = "{$naksWelder?->welder_name_ru}, {$weldLog->welder_1}";
    if($weldLog->welder_2 != "") {
      $welders .= "+ {$naksWelder2?->welder_name_ru}, {$weldLog->welder_2}";
    }


     $jointTypeRu = "";
    

     if($wps) {
        $jointTypeRu = $wps->joint_type_ru;
     }

     $manufacturing_standard_1 = "";

     if($mtos) {
        $manufacturing_standard_1 = $mtos?->manufacturing_standard;
     }

     $manufacturing_standard_2 = "";

     if($mtos2) {
        $manufacturing_standard_2 = $mtos?->manufacturing_standard;
     }
      
     if(strpos($weldLog->welding_materials_3, "Aргон") !== false) {
        $col6 = "-";
     } else {
        $col6 = "{$weldLog->welding_materials_3} $naksConsumablesData3";
     }

     if(strpos($weldLog->welding_materials_3, "Aргон") !== false) {
        $col7 = "{$weldLog->welding_materials_3} $naksConsumablesData3";
        
     } else {
        $col7 = "-";
     }

     $tempData = $temperatures[date("z", strtotime($weldLog->welding_date))];
     

     if($weldLog->type_of_joint == "S") {
        $thisTempData = $tempData['shop_ambient'];
        $thisTempData2 = $tempData['temp_material_shop'];
     } else {
        $thisTempData = $tempData['field_ambient'];
        $thisTempData2 = $tempData['temp_material_field'];
     }

     $col9 = "20 - 50 °С";

     if($thisTempData>=5) {
      $col9 = "просушка 20 - 50 °С";
     }

     $col10 = "Н/П";

     
     if($weldLog->rt_report !="") {
         $col19 = "РК";
     } elseif($weldLog->ut_report !="") {
         $col19 = "узк";
     } else {
         $col19 = "-";
     }

     $pmiData = "н/п";

     if($weldLog->pmi_report !="") {
         $pmiData = "Заключение №{$weldLog->pmi_report} от {$weldLog->pmi_test_date} годен ";
     }

     $htData = "н/п";

     if($weldLog->ht_report !="") {
         $htData = "Заключение №{$weldLog->ht_report} от {$weldLog->ht_test_date} годен";
     }

     $vtData = "";

     if($weldLog->vt_report !="") {
         $vtData = "Акт №{$weldLog->vt_report} от {$weldLog->vt_test_date} годен \n ";
     }

     $ptData = "";

     if($weldLog->pt_report !="") {
         $ptData = "ЦД: Заключение №{$weldLog->pt_report} от {$weldLog->pt_test_date} годен \n ";
     }

     $mtData = "";

     if($weldLog->mt_report !="") {
         $mtData = "Мк: Заключение №{$weldLog->mt_report} от {$weldLog->mt_test_date} годен \n";
     }

     $rtData = "";

     if($weldLog->rt_report !="") {
         $rtData = "Рк: Заключение №{$weldLog->rt_report} от {$weldLog->rt_test_date} годен \n";
     }

     $utData = "";

     if($weldLog->ut_report !="") {
         $utData = "узк: Заключение №{$weldLog->ut_report} от {$weldLog->ut_test_date} годен \n";
     }

     $ferriteData = "н/п";

     if($weldLog->ferrite_report !="") {
         $ferriteData = "Заключение №{$weldLog->ferrite_report} от {$weldLog->ferrite_test_date} годен \n";
     }

     if($weldLog->ut_report == "" && $weldLog->rt_report == "") {
      $utData = "н/п";
     }

     $pwhtData = "н/п";

     if($weldLog->pwht !="NO") {
         $pwhtData = "-";
     }

     $diagram_number_pwht = "н/п";

     if($weldLog->diagram_number_pwht !="") {
         $diagram_number_pwht = $weldLog->diagram_number_pwht;
     }

     $weldingMethod = $weldLog->welding_method;
     $weldingMethod = str_replace("/141", "", $weldingMethod);
     $weldingMethod = str_replace("/111", "", $weldingMethod);
     $weldingMethod = str_replace(",", " + ", $weldingMethod);
     
     $naksConsumablesTitle = "Проволока";
     if($weldLog->welding_materials_2 != "")
     {
        $naksConsumablesTitle = "Электроды";
     }

     
         // Save merged cell ranges in the template row
         foreach ($sheet->getMergeCells() as $mergeRange) {
            // Check if the merge range starts in the template row
            if (preg_match('/^\D*'.$startRow.'$/', explode(':', $mergeRange)[0])) {
               $mergedCells[] = $mergeRange;
            }
         }
        // Insert a new row before the next one (clone the template row)
        $sheet->insertNewRowBefore($startRow + 1, 1);

        // Get the newly inserted row
        $newRow = $sheet->getRowIterator($startRow + 1)->current();

        // Copy template row's values to the new row
        $cellIndex = 0; // To keep track of which cell we're on

        $incomingCertificate1 = db("incoming_controls")->where("certificate_no", $weldLog->certificate_number_of_1)->select("manufacturing_standard")->first()?->manufacturing_standard;
        $incomingCertificate2 = db("incoming_controls")->where("certificate_no", $weldLog->certificate_number_of_2)->select("manufacturing_standard")->first()?->manufacturing_standard;

        $rowReplacements = [
            '{1}' => $rowNumber,
            '{2}' => "{$weldLog->type_of_joint}{$weldLog->no_of_the_joint_as_per_as_built_survey} - $jointTypeRu",
            '{3}' => $welders,
            '{4}' => "{$weldLog->member_no_1} $incomingCertificate1, {$weldLog->material_no_1}, $manufacturing_standard_1 серт.№ {$weldLog->certificate_number_of_1} \n + \n {$weldLog->member_no_2}, {$weldLog->material_no_2} $incomingCertificate2,  $manufacturing_standard_2 серт.№ {$weldLog->certificate_number_of_2}",
            '{5}' => "Ø{$weldLog->outside_diameter_1} x {$weldLog->wall_thickness_1} \n Ø{$weldLog->outside_diameter_2} x {$weldLog->wall_thickness_2}",
            '{6}' => "{$weldLog->welding_date} \n $thisTempData °С",
            '{7}' => $weldingMethod,
            '{8}' => "$naksConsumablesTitle {$weldLog->welding_materials_1} $naksConsumablesData, \n {$weldLog->welding_materials_2} $naksConsumablesData2, \n {$weldLog->welding_materials_3} $naksConsumablesData3",
            '{9}' => $col9,
            '{10}' => $col10,
            '{11}' => $pmiData,
            '{12}' => $pwhtData,
            '{13}' => $diagram_number_pwht,
            '{14}' => $htData,
            '{15}' => "$vtData $ptData $mtData",
            '{16}' => "$rtData $utData",
            '{17}' => $ferriteData,
            // Gerekirse daha fazla hücre ekleyebilirsiniz
        ];
      //  dump($rowReplacements);
        $lineCount = 10;
        foreach ($newRow->getCellIterator() as $newCell) {
            // Şablon değerini al
            $templateValue = $templateRowCells[$cellIndex];
           

            /*
            foreach ($cleanupPatterns as $pattern) {
                $newCellValue = str_replace($pattern, "", $newCellValue);
            }
            */
            
            // Şablon değeri numaralandırılmış yer tutucu mu kontrol et
            if (isset($rowReplacements[$templateValue])) {
                // Yer tutucuyu gerçek değerle değiştir
                $newCell->setValue($rowReplacements[$templateValue]);
                $cellLineCount = substr_count($rowReplacements[$templateValue], "\n") + 1; // Satır sayısını hesapla (yeni satır karakterine göre)
                
                if($cellLineCount>$lineCount)
                {
                    $lineCount = $cellLineCount;
                }
                

            } else {
                // Eğer yer tutucu değilse, orijinal değeri koru veya farklı bir işlem yap
               // $newCell->setValue($templateValue);
            }
        
            $cellIndex++; // Bir sonraki hücreye geç
        }

        // Apply merged cells to the new row
        foreach ($mergedCells as $mergeRange) {
            // Adjust the merge range to the new row
            $adjustedMergeRange = preg_replace_callback('/\d+/', function($matches) use ($startRow) {
                    return $matches[0] + 1; // Shift row numbers by 1 for the newly inserted row
            }, $mergeRange);

            // Apply the adjusted merge range to the new row
            $sheet->getRowDimension($startRow)->setRowHeight($lineCount * 150);
            $sheet->mergeCells($adjustedMergeRange);
           

        }

        // Move to the next row for the next weld log entry
        $startRow++;
        $rowNumber++;
      //  dump($rowNumber);
                

        // After inserting all new rows, remove the original template row
        
        /*
        $rowData = str_replace(", - +", "", $rowData);
        $rowData = str_replace(",  +", "", $rowData);
        $rowData = str_replace(", -", "", $rowData);
        $rowData = str_replace(", \n", "", $rowData);
        $rowData = str_replace("Φ \n", "", $rowData);
        $rowData = str_replace("+ \n", "", $rowData);
        $allRowData .= $rowData;
        $k++;
     */
 }

 $sheet->removeRow($templateRowNumber);

 $replacements = [
    '{iso_number}' => $draw,
    '{basinc}' => $basinc,
    '{sicaklik}' => $sicaklik,
    '{line_list_fluid_ru}' => $line_list_fluid_ru,
    '{drawing_no}' => $drawing_no,
    '{first_welding_date}' => $first_welding_date,
    '{last_welding_date}' => $last_welding_date,
    '{cover_zone}' => $cover_zone,
];


 // Loop through all the cells in the sheet and replace placeholders
 foreach ($sheet->getRowIterator() as $row) {
    foreach ($row->getCellIterator() as $cell) {
       $cellValue = $cell->getValue();
       if (is_string($cellValue)) {
          foreach ($replacements as $placeholder => $replacement) {
                if (strpos($cellValue, $placeholder) !== false) {
                   $newValue = str_replace($placeholder, $replacement, $cellValue);
                   $cell->setValue($newValue);
                }
          }
       }
    }
 }
 

 $path = "005_PTO/02_ЖСР";
 $path2 = "005_PTO/00_ИД/$fileName";
 $path = "$path/$fileName";
 $path2 = "$path2/ЖСР-$fileName";

 $path = $documentInfo->kid; //"005_PTO/06_Прочность и плотность";
 
$fileName = str_replace("/", "-", $fileName);
$excelPath = "storage/documents/$path/$fileName.xlsx";

if (!file_exists(dirname($excelPath))) {
    mkdir(dirname($excelPath), 0777, true);
}

// Save the modified spreadsheet
$writer = IOFactory::createWriter($spreadsheet, 'Xlsx');
$writer->save($excelPath);
$resultPDF = xlsx_to_pdf_legacy($excelPath,  "storage/documents/$path");
$pdfFile = basename($resultPDF);

//dd("ok");

/*
html_create($path, $document, "landscape");
html_create($path2, $document, "landscape");
*/

    if(!getisset("all")) {
        if(!isset($redirect)) {
            yonlendir(url("storage/documents/$path/$pdfFile")); 
        }
        
    } else {
        $count++;
    }

}
 
 
 } 

 if(getisset("all")) {
    echo $count;
 }


    ?>