<?php 
use App\Models\NdeMatrix; 
use Carbon\Carbon; 

// SaveTrigger'dan çağrılıp çağrılmadığını kontrol et
$triggerMode = isset($triggerMode) ? $triggerMode : false;

if($triggerMode && isset($line_number) && isset($design_area)) {
    // SaveTrigger'dan çağrıldıysa sadece belirli line_number ve design_area için işlem yap
    $lineLists = db("line_lists")
        ->where("line_no", $line_number)
        ->where("unit", $design_area)
        ->get();
    
    $weldlogs = apply_welded_filter(
        db("weld_logs")
            ->where("line_number", $line_number)
            ->where("design_area", $design_area)
    )->get();
        
    Log::debug("SaveTrigger mode: processing specific line for NDE Matrix", [
        'line_number' => $line_number,
        'design_area' => $design_area,
        'line_lists_found' => $lineLists->count(),
        'weld_logs_found' => $weldlogs->count()
    ]);
} elseif(isset($id)) {
    $lineLists = db("line_lists")->where("id", $id)->get();
    $weldlogs = db("weld_logs");
    if(isset($id)) {
        $weldlogs = $weldlogs->where("line_number", $lineLists[0]?->line_no);
    }
    $weldlogs = apply_welded_filter($weldlogs)->get();
} else {
    $lineLists = db("line_lists")->get();
    $weldlogs = apply_welded_filter(db("weld_logs"))->get();
}


$specJointTypes = [];

foreach($weldlogs AS $weldlog) {
    // fluid_code null kontrolü ekle - SaveTrigger'daki mantıkla uyumlu
    $fluidCode = $weldlog->fluid_code ?? '';
    if(empty($fluidCode)) {
        // fluid_code null ise line_lists'ten al
        $lineListForFluid = $lineLists->where('line_no', $weldlog->line_number)->first();
        if($lineListForFluid) {
            $fluidCode = $lineListForFluid->fluid_code ?? '';
        }
    }

    if(!empty($fluidCode)) {
        if(!isset($specJointTypes[$fluidCode][$weldlog->line_number])) 
            $specJointTypes[$fluidCode][$weldlog->line_number] = [];
        
        if(!in_array($weldlog->type_of_welds, $specJointTypes[$fluidCode][$weldlog->line_number]))
            $specJointTypes[$fluidCode][$weldlog->line_number][] = $weldlog->type_of_welds;
    }
}


$cachePrefix = "sync-from-linelists-nde-matrix";
Log::debug("$cachePrefix start " . simdi());
$lastId = get_cache_id($cachePrefix);


$ndeMatrix = NdeMatrix::get();
if($ndeMatrix->count() == 0) {
    $lineLists = db("line_lists")
        ->get(); 
}

if($lineLists->count() == 0) {
    set_cache_id($cachePrefix, 0);
}

$count = 0;
$say = 0;

// SaveTrigger'dan gelen commitSize'ı kullan, yoksa varsayılan değer
$commitSize = isset($commitSize) ? $commitSize : 50;

$update = 0;
$create = 0;

DB::beginTransaction();
try {
    foreach($lineLists AS $lineList) {


            // fluid_code null kontrolü ekle - SaveTrigger'daki mantıkla uyumlu
            $lineListFluidCode = $lineList->fluid_code ?? '';
            if(empty($lineListFluidCode)) {
                continue; // fluid_code null ise bu line_list'i atla
            }

            if(isset($specJointTypes[$lineListFluidCode][$lineList->line_no])) {
                $typeOfJoint = $specJointTypes[$lineListFluidCode][$lineList->line_no];
                //dump($typeOfJoint);

                foreach($typeOfJoint AS $jointItem) {
                    $ht = 0;
                    if($lineList->pwht == "YES") $ht = 100;
                    $data = [
                        'design_area' => $lineList->unit,
                        'fluid' => $lineListFluidCode,
                        'line' => $lineList->line_no,
                        'line_spec' => $lineList->line_specification, 
                        'operation_temp' => $lineList->working_temperature,
                        'operations_pressure_kg' => $lineList->working_pressure_mpa,
                        'type_of_joint' => $jointItem,
                        'pwht' => $lineList->pwht,
                        'pwht_field' => $lineList->pwht,
                        'pipe_material_class' => $lineList->pipe_material_class,
                        'ht' => $ht,
                        'ndt' => $lineList->ndt,
                        //'ndt' => $lineList->painting_cycle,
                        'piping_class_according_to_gost' => $lineList->category,
                        'piping_group' => $lineList->fluid_group,
                        'rev' => $lineList->rev
                    ];

                    
                    //line design_area fluid unique
                
                    $already = NdeMatrix::where([
                        'line' => $lineList->line_no,
                        'type_of_joint' => $jointItem,
                        'fluid' => $lineListFluidCode,
                    ])->first();
                    
                    if($already) {

                        unset($data['pwht_field']);
                        
                        NdeMatrix::where([
                            'line' => $lineList->line_no,
                            'type_of_joint' => $jointItem,
                            'fluid' => $lineListFluidCode,
                        ])->update($data);
                    //  //dump("{$lineList->line_no} $jointItem Update");
                        $update++;
                    } else {
                        NdeMatrix::create($data);
                    //  //dump("{$lineList->line_no} $jointItem Added");
                        $create++;
                    }

                   
                } 

            
            } else {
                Log::warning($lineList->line_no . " " . $lineListFluidCode . " [WELDLOG ➡️ NDE MATRIX NOT FOUND]");
            }

            
            set_cache_id($cachePrefix, $lineList->id);
            

            $count++;
            if($say == $commitSize) {
               
                $say = 0;
                DB::commit();
                DB::beginTransaction();
            }
            $say++;
           
    }

    DB::commit();
    
    
} catch (\Throwable $th) {
    //throw $th;
    dump($th);
    DB::rollback();
}


//dump("NDE Matrix affected rows: $update updated $create created");
Log::debug("$cachePrefix finish " . simdi());

 ?>